Table of Contents
Advertisement
Using additional functions
Activating the protected
settings mode
Deactivating the protected
settings mode and saving the
advanced settings
30 |
RS 5000
Advanced settings
The advanced settings allow you to adjust the wireless headphone
system to your individual needs and to protect the settings against
accidental changes.
You can change the advanced settings by activating the protected
settings mode:
1
Disconnect the transmitter from the power supply system by
unplugging the connector of the power supply unit.
Hearing profile
2
Keep the
mitter to the power supply system by connecting the connector
of the power supply unit to the yellow socket of the transmitter.
1
The protected settings mode is activated. The
LED flashes blue. The LED segments indicate the current settings as
specified in the following chapters:
• battery status display (see page 31)
• charging reminder function (see page 31)
• hearing profile and balance protection (see page 32)
To save the advanced settings and to deactivate the protected set-
tings mode:
3
Disconnect the transmitter from the power supply system by
unplugging the connector of the power supply unit.
3
button pressed and connect the trans-
2
1A
1A
1A
Transmitter status
Advertisement
Table of Contents
