Philips Norelco 8160XLCC User Manual page 12

8160XLCDFU021_16_05Norelco.qxd
ENGLISH
12
Jet Clean & Charge System
◗ See separate Jet Clean & Charge instruction
Charging Razor with a Cord
◗ Do not leave the razor continuously plugged
C
C
As you charge razor, the bottom light on the
display blinks red. After a few minutes, it will then
turn green and blink. As charging continues, more
and more lights of the display meter will briefly
blink green and light up to indicate what level of
the batteries have been charged.
◗ An adaptor plug may be necessary for
The charging plug will automatically convert to
work on 100V to 240V AC systems.
3/4/05
book for complete charging and cleaning
instructions.
into outlet charging as it would reduce life of
batteries. Remove the plug from outlet as
soon as the razor is fully charged.
Connect cord directly to razor; connect
1
the charging plug into any 100V to 240V
AC outlet. Use only the charging plug
provided.
charging plug usage in some foreign countries.
Use an attachment plug adaptor of the proper
configuration for the power outlet.
3:49 PM Page 12 (Zwart plate)