Advertisement
Quick Links
OE-400
OE-402
OE-462
OE-522
OE-652
OE-675
OE-682
OE-692T
OE-693
OE-690D
OE-700
AUTOSOUND OE SERIES SPEAKERS
Application Guide
Please read through this manual to familiarize yourself with your new speakers. Should your PowerBass
Autosound speakers ever require service, you will need to have the original dated receipt.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for PowerBass AUTOSOUND OE Series
Summary of Contents for PowerBass AUTOSOUND OE Series
- Page 1 OE-682 OE-692T OE-693 OE-690D OE-700 AUTOSOUND OE SERIES SPEAKERS Application Guide Please read through this manual to familiarize yourself with your new speakers. Should your PowerBass Autosound speakers ever require service, you will need to have the original dated receipt.
- Page 3 170 dB. Please observe all local sound ordinances while listening to your PowerBass Autosound system. PowerBass USA, Inc. accepts no liability for hearing loss, bodily injury, or property damage due to the result of use or misuse of this product.
- Page 4 POWERBASS AUTOSOUND OE FULL RANGE FEATURES Advanced Injection Molded Cone: An injection molded PP cone was developed for better bass perfor- mance while minimizing distortion. This ultra lightweight cone is resistant to elements of the environment while giving the listener impeccable listening experience over the factory speakers. (OE-400 uses a Pressed...
- Page 5 SPECIFICATIONS FOR POWERBASS OE SERIES SPEAKERS (Due to Constant Improvements, Specifications and Parameters are subject to change without notice.)* Model Size Nominal Frequency Sensitivity Magnet Mounting Power RMS/ Impedance Response 1W/1M Size Depth Peak OE-400 4” 2-ohm 80Hz-5.5kHz 89dB 16 oz.
- Page 6 Installation of PowerBass Autosound Speakers requires experience with a variety of mechanical and electrical procedures. This manual only provides general installation and operation instructions. If you have any reserva- tions about your installation skills or lack of the proper tools, please contact your local PowerBass Autosound dealer for assistance.
-
Page 7: Preparing For Installation
• These PowerBass Autosound speakers can be used above or below the mounting hole. Typically, your vehicle factory’s speaker cutouts will accommodate these new speakers without any modifications. - Page 8 OE-690D WIRING DIAGRAM The OE-690D has been designed to work with multiple impedance requirements. The dual voice coil dsign can be wired into two different configurations depending on the impedance requirement of your OEM amplifier. * Both coils must be wired in one of the above configurations to ensure proper operation of this speaker.
- Page 9 Please call (909) 923-3868 for PowerBass Customer Service. You must obtain an RA# (Return Authorization Num- ber) to return any product to PowerBass. The RA number must be prominently marked on the outside of the shipping carton or the delivery will be refused. Please pack your return carefully; we are not responsible for items damaged in shipping.
- Page 10 Page is intentionally left blank...
- Page 12 PowerBass Autosound – A division of PowerBass USA, Inc. 2133 S. Green Privado – Ontario, CA 91761 Tel. (909) 923-3868 – Fax (909) 923-8048 www.powerbassusa.com...
Need help?
Do you have a question about the AUTOSOUND OE Series and is the answer not in the manual?
Questions and answers