Telecor TMS-MA Installation Manual page 21

When the TMS-MA is set to play audio from radio, the LCD display on the front of the TMS-MA
will display the following:
To scan for radio stations and save them to memory:
1. Press and hold Play/Pause. When the TMS-MA is scanning for radio stations, it will
show a progress bar on the LCD display. Once finished, the detected radio stations will
be saved to memory for easier navigation.
To change the radio station:
1. Press Left or Right on the front of the TMS-MA or the remote to go to the next radio
station.
Note: If a radio station scan was not performed and no radio stations have been saved to memory,
pressing Left or Right will change the selected radio frequency in 0.1Mhz increments. Left or
Right can also be pressed and held to navigate through the frequency range.
To play or pause audio:
1. Press Play/Pause on the front of the TMS-MA or the remote.
To mute the audio:
1. Press Mute on the remote.
TMS-MA Telecor Media Source Model A Installation Manual
TMS-MA Playing Radio Audio
21