Controls
(illustrations on page 3)
Controls on the system and
remote control
1
Eco Power/STANDBY ON y
–
to switch the system on or to Eco Power
standby mode.
2
Display screen
–
to view the current status of the system.
3
DISPLAY/BAND
for Tuner ............. to select waveband : FM or AM
for CD/MP3-CD...to select disc information
display mode.
4
PROGRAM
for CD/MP3-CD...to programme disc tracks.
for Tuner ............. to programme preset radio
stations.
5
CLOCK SET
for Clock ............ (on the system only) to set the
clock function.
S T TUNING ( à á )
6
for CD ................. to fast reverse/forward the disc.
for CD/MP3 CD...(on the system only) to select
a desired track.
for Tuner ............. to tune to a lower or higher
radio frequency.
for Tape ............... to rewind or fast forward.
7
43 ALBUM/PRESET/TIMER SET
for MP3-CD ..... to select previous/next album.
for Tuner ............. to select a preset radio station.
for Timer Set (3) (on the system only) to set the
timer function.
8
9 STOP
for CD/MP3-CD...to stop playback or to clear a
programme.
for Tape ............... to stop playback or recording.
9
PLAY/PAUSE É Å
for CD/MP3 CD...to start or interrupt playback.
for Tape ............... to start playback.
0
Tape deck
!
OPEN ç
–
to open tape compartment.
@
IS/DBB (Incredible Surround/Dynamic
Bass Boost)
–
to create a super-enhanced stereo effect.
–
to enhance the bass.
12
#
DSC (Digital Sound Control)
–
to select the desired sound effect : OPTIMAL/
ROCK/POP/JAZZ.
$
VOLUME (VOL + / -)
–
to increase or decrease the volume.
(on the system only) to adjust the hours and
–
minutes for the clock/timer functions.
%
SOURCE
–
to select the respective sound source : CD,
TUNER, TAPE or AUX.
^
RECORD
–
to start recording.
&
iR sensor
–
infrared sensor for remote control.
OPEN•CLOSE 3
*
–
to open or close the disc tray.
(
n Headphone
–
Plugs in the headphones jack. The speakers
output will be cancelled.
)
MODE
–
to shuffle and repeat a track/disc.
¡ / ™
¡
–
to select a desired track.
™
MUTE
–
interrupts and resumes sound reproduction.
£
TIMER
–
to activate/deactivate the timer function.
≤
SLEEP
–
to activate/deactivate or set the sleep timer.
∞
B
–
to switch the system to standby mode.
Notes for remote control:
– First select the source you wish to control
by pressing one of the source select keys on
the remote control (for example CD,
TUNER).
– Then select the desired function (for
example É , í , ë ).