APPENDIX A. FREECOM 1+/2+ LED INDICATIONS
Your FREECOM 1+/2+ operates in various modes. Each mode consists of a group of features currently available
for your use. For example, when FREECOM 1+/2+ plays music, it will be in music playing mode, enabling
features related to playing music such as skipping to the next and previous tracks.
Events are considered to occur whenever you operate a feature and when FREECOM 1+/2+ responds. For
example, turning on music is an event.
The device's current mode is indicated by the unit LEDs. You also hear voice announcements on your unit for
mode changes and events.
The following table shows LED indications for modes and events according to the current battery state.
LED
Blue
For 2 seconds
Blue
Fast (three times)
Blue
Fast (repeating fast)
Blue
Slow (repeated at 3-second intervals)
Blue
Slow twice (repeated at 3-second
intervals)
Purple
For 2 seconds
Purple
Slow (5 times)
Purple/Red Purple twice slowly, then red
Purple/Red Slow purple and red (repeating)
Red
Slow twice (repeated at 3-second
intervals)
Red
Fast (repeated at 3-second intervals)
Red
Fast (repeating fast)
Red
Fast (3 times)
Red
For 2 seconds
Red
Remains on
Red/Blue
Alternating fast
Red/Blue
Alternating slow
All manuals and user guides at all-guides.com
Flashing
Normal
Normal
Low Battery
Charging
Normal,
Low Battery
Charging
Normal
Normal
Normal
Low Battery
Charging
Normal
Low Battery
Charging
Charging
Low Battery
Low Battery
Normal
Low Battery
Charging
Normal
Low Battery
Charging
Normal
Low Battery
Charging
Charging
Normal
Low Battery
Charging
Normal
Low Battery
Battery State
Rider B connected
●
Set voice control to enabled
●
Power on
●
Pairing intercom rider B
●
Standby
●
Incoming/outgoing call (intercom or
●
mobile)
Audio active (intercom, FM, A2DP, GPS)
●
Mobile pairing successful
●
Mobile connected
●
Reset pairing
●
Incoming/outgoing call (intercom or
●
mobile)
Audio active (intercom, FM, A2DP, GPS)
●
Standby
●
Incoming/outgoing call (intercom or
●
mobile)
Audio active (intercom, FM, A2DP, GPS)
●
Standby
●
Pairing intercom rider A
●
Power off
●
Rider A connected
●
Set voice control to disabled
●
Off
●
Pairing Mobile 1
●
Pairing GPS 1
●
Mode or Event
Need help?
Do you have a question about the FREECOM 1 + and is the answer not in the manual?