Electrical Installation; Connection On Delivery; Switch-Over - Asko PROFESSIONAL TDC145VG Operating Instructions Manual

ELECTRICAL INSTALLATION

Connect the machine by plugging it into an earthed wall
socket. The electrical wall socket must be placed outside
of the installation area to be easily accessible.

CONNECTION ON DELIVERY

• 400 V, 3-phase, 16 A
• 50 Hz
• Heat output 5000W
• Use a type A residual-current device.
NOTE!
Do not connect the machine to the mains electricity
supply by an extension lead.

SWITCH-OVER

The switchover must be performed by a qualifi ed
electrician.
See the Settings chapter.
18