Equinox Systems Fusion 120 Zoom User Manual page 6

DMX mode:
Operating in a DMX control mode environment gives the user the greatest flexibility when it comes
to customising or creating a show. In this mode you will be able to control each individual trait of
the fixture and each fixture independently.
To access the DMX address mode, press the "MENU" button on the front of the unit to show
A001
on the LED display. Now press the "ENTER" button and use the "UP" and "DOWN"
buttons to set the required DMX address. Press the "ENTER" button to confirm the setting.
To exit out of any of the above options, press the "MENU" button.
DMX channel mode:
To access the DMX channel mode, press the "UP" button on the front of the unit to show
on the LED display. Now press the "ENTER" button and use the "UP" and "DOWN" buttons to choose
one of the 8 or 16 DMX channel modes. Press the "ENTER" button to confirm the setting.
To exit out of any of the above options, press the "MENU" button.
PLEASE NOTE: When the unit is receiving DMX the first red dot on the display will flash.
8 channel mode:
Channel Value Function
CH1 000-255 Pan adjustment 0-540°
CH2 000-255 Tilt adjustment 0-190°
CH3 000-255 Zoom adjustment
CH4 000-255 Master dimmer (0-100%)
CH5 000-255 Red (0-100%)
CH6 000-255 Green (0-100%)
CH7 000-255 Blue (0-100%)
CH8 000-255 White (0-100%)
www.prolight.co.uk
Operating instructions
Fusion 120 Zoom User Manual
CHNd
6