Equinox Systems Fusion 120 Zoom User Manual page 8

Pan/tilt speed setting:
To access the pan/tilt speed setting, press the "UP" button on the front of the unit to show
on the LED display. Now press the "ENTER" button and use the "UP" and "DOWN" buttons to choose
HISP
between (fast) or
To exit out of any of the above options, press the "MENU" button.
Master/slave mode:
To set the master unit, press the "UP" button on the front of the master unit to show
display. Now press the "ENTER" button and use the "UP" and "DOWN" buttons to choose
the "ENTER" button to confirm the setting. Then select your desired program (sound active or one of the
show modes).
To set the other units in slave mode, press the "UP" button on the front of the unit to show
on the LED display. Now press the "ENTER" button and use the "UP" and "DOWN" buttons to choose
SL 1
either . Press the "ENTER" button to confirm the setting. The unit will now run in sequence with
the master unit.
To exit out of any of the above options, press the "MENU" button.
Please ensure that all slave units are set to the same DMX channel mode as the master unit.
Show mode:
To access the show modes, press the "UP" button on the front of the unit to show
on the LED display. Now press the "ENTER" button and use the "UP" and "DOWN" buttons to choose
SH 1 SH 4
between ~
To exit out of any of the above options, press the "MENU" button.
SH 1
– full show
SH 2
– slow show 1
SH 3
– slow show 2
SH 4
– forward facing show
Sound/sound sensitivity:
To turn the sound mode on or off, press the "UP" button on the front of the unit to show
LED display. Now press the "ENTER" button and use the "UP" and "DOWN" buttons to choose between
on oFF
or . Press the "ENTER" button to confirm the setting.
To adjust the sound sensitivity, press the "UP" button on the front of the unit to show
LED display. Now press the "ENTER" button and use the "UP" and "DOWN" buttons to choose between
000 100
~ . Value: 000 - 100 (000 = low, 100 = high)
To exit out of any of the above options, press the "MENU" button.
www.prolight.co.uk
LoSP
(slow). Press the "ENTER" button to confirm the setting.
. Press the "ENTER" button to confirm the setting.
Operating instructions
Fusion 120 Zoom User Manual
SPNd
SLNd
on the LED
Nast
. Press
SLNd
ShNd
Soun
on the
NIC
on the
8