Table of Contents
Advertisement
TD-W9970/TD-W9970B
To filter wireless users by MAC Address, click Enable. The default setting is Disabled.
MAC Address: The wireless station's MAC address that you want to filter.
Status: The status of this entry either Enabled or Disabled.
Description: A simple description of the wireless station.
To Add a Wireless MAC Address filtering entry, click the Add New button. The following page will
appear, shown in Figure 4-49:
To add or modify a MAC Address Filtering entry, follow these instructions:
1.
Enter the appropriate MAC Address into the MAC Address field. The format of the MAC
Address
is
XX:XX:XX:XX:XX:XX
00:1D:0F:11:22:33.
Give a simple description for the wireless station in the Description field. For example:
2.
Wireless station A.
3.
Select Enabled or Disabled for this entry on the Status drop-down list.
4.
Click the Save button to save this entry.
To edit or delete an existing entry:
Click the Edit in the entry you want to modify.
1.
2.
Modify the information.
3.
Click the Save button.
300Mbps Wireless N USB VDSL/ADSL Modem Router User Guide
Figure 4-48
Figure 4-49
(X is
63
any
hexadecimal
digit).
For
example:
Advertisement
Table of Contents
