TP-Link TD-9970B User Manual page 34

TD-W9970/TD-W9970B
Click Advance, advanced selections of ATM Configuration can be shown.
Encapsulation Mode: Select the encapsulation mode for the Static IP Address. Here you

can leave it default.
ATM Qos Type: Select ATM Qos Type provided by ISP, and the type is UBR by default.

WAN Service Setup:
Enable IPv4：Check the box to enable IPv4.

IP Address: Enter the IP address in dotted-decimal notation provided by your ISP.

300Mbps Wireless N USB VDSL/ADSL Modem Router User Guide
Figure 4-11
26