TP-Link TD-9970B User Manual page 68

TD-W9970/TD-W9970B
Disable Wireless Security: If you do not want to use wireless security, check this radio

button. But it's strongly recommended to choose one of the following modes to enable
security.
WPA/WPA2-Personal: It's the WPA/WPA2 authentication type based on pre-shared

passphrase. The modem router is configured by this security type by default.
Authentication Type: You can choose the type for the WPA/WPA2-Personal security on
•
the drop-down list. The default setting is Auto, which can select WPA-PSK or WPA2-PSK
authentication type automatically based on the wireless station's capability and request.
Encryption: You can select Auto, TKIP or AES as Encryption.
•
Wireless Password: You can enter ASCII characters between 8 and 63 characters or 8 to
•
64 Hexadecimal characters. The default password is the same with the default PIN code,
which is labeled on the bottom of the Router or can be found in Figure 4-43.
Group Key Update Period: Specify the group key update interval in seconds. The value
•
should be 30 or above. Enter 0 to disable the update.
WPA/WPA2 – Enterprise: It's based on Radius Server.

Authentication Type: Authentication Type: You can choose the type for the
•
WPA/WPA2-Personal security on the drop-down list. The default setting is Auto, which can
300Mbps Wireless N USB VDSL/ADSL Modem Router User Guide
Figure 4-46
60