Bosch Drill Assistant 730 Original Instructions Manual page 17

Intended Use
The power tool is intended for impact drilling in brick, con-
crete and stone, as well as for drilling in wood, metal,
ceramic and plastic. Tools with electronic control and clock-
wise/anticlockwise rotation are also suitable for screwdriv-
ing.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Keyless chuck
(2) Spindle lock button (UniversalImpact 650, Univer-
salImpact 700, UniversalImpact 700 + Drill Assist-
ant)
(3) "Drilling/impact drilling" selector switch
(4) Rotational direction switch
(5) Lock-on button for on/off switch
(6) On/off switch
(7) Speed preselection thumbwheel
(8) Release button for Drill Assistant
(9) Auxiliary handle with depth stop
a)
(10) Drill Assistant
a)
(11) Dust container
(12) Dust container release button (2x)
a)
(13) Dust collection device
Technical Data
Impact drill
Article number
Rated power input
Max. power output
No-load speed
Rated speed
Impact rate
Rated torque
Stall torque in accordance
with EN 62841
Speed preselection
Constant Electronic
Clockwise/anti-clockwise ro-
tation
Rapid shut-off (KickBack con-
trol)
Fully automatic spindle lock
(Auto-Lock)
Spindle collar diameter
Max. drilling diameter
Bosch Power Tools
(14) Sealing ring
(15) Dust protection ring
(16) Clamp for dust collection device
(17) Adjusting ring
(18) Wing bolt for auxiliary handle attachment for Drill As-
(19) Handle (insulated gripping surface)
(20) Auxiliary handle (insulated gripping surface)
(21) Wing bolt for auxiliary handle adjustment
(22) Button for depth stop setting
(23) Depth stop
(24) Universal bit holder
(25) Screwdriver bit
(26) Adapter
(27) Hex key
(28) Keyed chuck
(29) Chuck key
a) Included as standard with the UniversalImpact 700 + Drill
a)
Assistant
a)b)
b) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
c) Commercially available (not included in the scope of deliv-
ery)
a)
UniversalImpact UniversalImpact
650
3 603 A31 2..
W 701
W 530
-1
min 50–3 000
-1
min 50–3 000
-1
min 45 000
Nm 1.65
Nm 17
●
–
●
–
–
mm 43
a)
a)
a)
a)
sistant
b)
b)
b)
b)
a)
c)
UniversalImpact
700 700 +
Drill Assistant
3 603 A31 0.. 3 603 A31 0..
701 701
530 530
50–3 000 50–3 000
50–3 000 50–3 000
45 000 45 000
1.65 1.65
17 17
●
–
●
–
–
43 43
1 609 92A 57D | (12.10.2021)
English | 17
a)
b)
UniversalImpact
730
3 603 A31 0..
701
530
50–3 000
50–3 000
45 000
1.65
17
● ●
– –
● ●
– –
– –
43