Configuring Local Area Network - D-Link DSL-2540U Quick Installation Manual
Adsl annex b/ethernet router with built-in switch
Hide thumbs
Also See for DSL-2540U:
- User manual (86 pages) ,
- Quick installation manual (14 pages) ,
- User manual (75 pages)
Table of Contents
Advertisement
DSL-2540U
Configuring Local Area Network
1.
Go to the Net / LAN page. If needed, change the IP address of the
router's LAN interface and the mask of the local subnet in the IP
Address and Netmask fields. Then click the Save button.
By default, the DHCP server of the router is enabled. In the DHCP
2.
server section, you can change the parameters of the DHCP server. If
you want to manually assign IP addresses to devices of your LAN, disable
the DHCP server (select the Disable value from the Mode drop-down
list).
3.
After specifying the DHCP server settings, click the Save button.
Quick Installation Guide
14
Advertisement
Table of Contents
