Panning Funcion; Non-Stop Music Relay Function; Dance Time Function; Tempo Function - Samsung PREMIUM MX-HS8000 User Manual

+PANNING Funcion

Increases the left and right speaker's output in
turn and makes it seem as if the sound is moving
from side to side.
| NOTES |
✎ To apply the PANNING effect to another effect,
press the +PANNING button when the other
effect is active or press another effect button
when the PANNING effect is active.

NON-STOP MUSIC RELAY Function

The NON-STOP MUSIC RELAY function plays
music continuously without an interval between
tracks/files. If there were two mp3 files, it skips to
the next file's 10 seconds from start position when
the previous track reaches its10 seconds before
end position.
Press the NON-STOP MUSIC RELAY button on
the product or NON-STOP RELAY button on the
remote control.
Each time you press this button, the mode
changes as follows:
NON-STOP RELAY ON ; NON-STOP RELAY
OFF
| NOTES |
✎ This function is only available during playback
of a CD/USB.

DANCE TIME Function

Press the DANCE TIME button on the remote
control when playing music to play the dance
music stored in the product.
Use this function to enjoy exciting music.
1. Press the DANCE TIME button on the
remote control.
Each time you press this button, the mode
changes as follows:
DANCE TIME ON ; DANCE TIME OFF
2. To cancel this function, press the DANCE
TIME button until "DANCE TIME OFF" is
displayed.
| NOTES |
✎ When the DANCE TIME sound file finishes
playing, the DANCE TIME mode changes to
DANCE TIME OFF.
✎ When DANCE TIME mode is swithed ON, the
music from B/T, TV SoundConnect, TUNER,
and AUX Source goes into Mute mode.
✎ If you set DANCE TIME to OFF during playback
of a CD or USB, playback returns to the
beginning of the current track.
✎ You can change dance music by pressing 1 ,
2 button When playing of a DANCE TIME
sound file.

TEMPO Function

Use this to change the TEMPO while music is
playing.
1.
During playback (CDDA/ MP3/ WMA), press
the TEMPO button on the remote control.
2.
Select the desired TEMPO by using the
EFFECT LEVEL button on the remote
control.
| NOTES |
✎ TEMPO Function does not operate in the
Bluetooth, TV SoundConnect, FM and AUX
mode.
✎ When you turn TEMPO off, all TEMPO settings
are lost.

Booting Sound Function

When the Booting Sound Function is on, your Hi-fi
Component demonstrates it's audio prowess as it
boots up.
1. Press the product's GIGA SOUND BEAT
button or the remote control's GIGA button
for 5 seconds. The BOOTING SOUND menu
appears on the display panel.
2. Press the product's GIGA SOUND BEAT
button or the remote control's GIGA button
for 5 seconds to turn the BOOTING SOUND
function On or Off.
25
English