Panning Function; Non-Stop Music Relay Function; Dance Time Function; Tempo Function - Samsung MX-HS6000 User Manual

+PANNING Function

Increases the left and right speaker's output in
turn and makes it seem as if the sound is moving
from side to side.
| NOTES |
✎ To apply the PANNING effect to another effect,
press the +PANNING button when the other
effect is active or press another effect button
when the PANNING effect is active.
✎ You can apply the PANNING effect to the
FLANGER, WAHWAH,CHORUS, TREMOLO,
FUZZ,PHASER, or SLAPBACK effect.

NON-STOP MUSIC RELAY Function

The NON-STOP MUSIC RELAY function plays
music continuously without an interval between
tracks/files. If there were two mp3 files, it skips to
the next file's 10 seconds from start position when
the previous track reaches its 10 seconds before
end position.
Press the NON-STOP MUSIC RELAY button on
the product or NON-STOP RELAY button on the
remote control.
Each time you press this button, the mode
changes as follows:
NON-STOP MUSIC RELAY ON ; NON-STOP
MUSIC RELAY OFF

DANCE TIME Function

Press the DANCE TIME button on the remote
control when playing music to play the dance
music stored in the product.
Use this function to enjoy exciting music.
1. Press the DANCE TIME button on the
remote control or on the product.
Each time you press this button, the mode
changes as follows:
DANCE TIME ON ; DANCE TIME OFF
2. To cancel this function, press the DANCE
TIME button until "DANCE TIME OFF" is
displayed.
| NOTES |
✎ When the DANCE TIME sound file finishes
playing, the DANCE TIME mode changes to
DANCE TIME OFF.
✎ When DANCE TIME mode is switched ON,
the BT, TV SoundConnect, TUNER, and AUX
sources enter Mute mode.
✎ When playing a DANCE TIME sound file, you
can change the dance music by pressing the
SKIP button.
✎ If you set DANCE TIME to OFF during
playback of a CD or USB, playback of the CD
or USB starts again from the beginning of the
current track.

TEMPO Function

Use this to change the TEMPO (-10 ~ +10) while
music is playing.
1.
During playback (CDDA/ MP3/ WMA), press
the TEMPO button on the remote control or
on the product.
2.
Select the desired TEMPO by using the
EFFECT LEVEL button on the remote control
or DJ JOG button on the product.
• High speed search does not work on TMEPO
mode.
| NOTES |
✎ TEMPO Function does not operate in the
Bluetooth, TV SoundConnect, FM ,AM and
AUX mode.
✎ When you turn TEMPO off, all TEMPO settings
are lost.

Booting Sound Function

When the Booting Sound Function is on, your Hi-fi
Component demonstrates it's audio prowess as it
boots up.
1. Press the product's GIGA SOUND BEAT
button or the remote control's GIGA button
for about 3 seconds. The BOOTING SOUND
menu appears on the display panel.
2. Press the product's GIGA SOUND BEAT
button or the remote control's GIGA button
for about 3 seconds to turn the BOOTING
SOUND function On or Off.
27 27
English English