RIGHT-HAND STALK SWITCH
The right-hand stalk switch controls the wiper blades and the rain sen-
sor.
Move the stalk switch downward to make one single sweep on the
–
windscreen.
Move the lever in steps upwards for intermittent, normal and fast
–
speeds.
Adjust the interval speed using the stalk switch's thumbwheel.
–
Move the lever towards the steering wheel in order to start the wind-
–
screen and headlamp washers.
Press the rain sensor button to activate/deactivate the rain sensor.
The windscreen wiper stalk switch must be in position 0, or in the
position for a single sweep. The rain sensor automatically starts
the windscreen wipers based on how much water it detects on the
windscreen. Turn the thumbwheel up/down for higher/lower sen-
sitivity.
Use windscreen wiper service mode when e.g. replacing,
cleaning or lifting the wiper blades. Tap on the
button in the centre display's function view to acti-
Position
vate or deactivate service mode.
Wiper Service
02