RIGHT-HAND STALK SWITCH
The right-hand stalk switch controls the wiper blades and the rain
sensor.
Move the stalk switch downward to make one single sweep on
–
the windscreen.
Move the lever in steps upwards for intermittent, normal and fast
–
speeds.
Adjust the interval speed using the stalk switch's thumbwheel.
–
Move the lever towards the steering wheel in order to start the
–
windscreen and headlamp washers.
Press the rain sensor button to activate/deactivate the rain
sensor. The windscreen wiper stalk switch must be in position
0, or in the position for a single sweep. The rain sensor auto-
matically starts the windscreen wipers based on how much
water it detects on the windscreen. Turn the thumbwheel up/
down for higher/lower sensitivity.
Use windscreen wiper service mode when e.g. replacing,
cleaning or lifting the wiper blades. Tap on the
button in the centre display's function
Service Position
view to activate or deactivate service mode.
Wiper
02