Table of Contents
Advertisement
4
Configuration of the tag
The i-B350L W is configured using the i-PROG M350L programming device.
Important Note
Do not open the housing! Configuration is done using the built-in air interface of the i-B350L W.
In addition to the Broadcast mode the i-B350L W offers the following special functions that can be configured:
Bursts on entering a marker field can be configured independent from regular Pings
Marker technology
Bursts triggered by the push button can be configured independent from regular Pings
Tools Needed
PC running on MS Windows with the ILR Tag Configuration for ILR 350 series tags
Connected to an i-PROG M350L to configure the tags
Overview on the Configuration Software
Select Ping Rate and Ping
Message Content in the block
―Broadcast‖
VISIBILITY DELIVERED.
Select Burst behavior on
entering a marker field in
the block ―Marker‖
Select Burst behavior when
the button is pressed in the
block ―Push Button‖
PAGE 10 OF 21
Advertisement
Table of Contents
