Page 1
Indoor/Ourdoor humidity & Temperature Monitor INSTRUCTION MANUAL Model No. TP-60 Introduction Congratulations on your purchase of the Professional Indoor/Ourdoor humidity & Temperature Monitor , You will now be able to detect indoor and outdoor temperature and humidity.And can remember the past all-...
Page 2
Press to select the temperature display in º C or º F.When the maximum and minimum display ° F/° C/All-time/24: status, press once to display the maximum and minimum records of the last 24 hours press to Change between current, maximum and minimum temperature & humidity;Press and MAX/MIN/Clear: hold to Clear the history data.
Page 3
6、If the battery is below 2.6V, the transmitter and receiver have a low battery indication above the LCD of the receiver. Place the Receiver Station and Transmitter 1、The Receiver station should always be placed in a well ventilated indoor area and located away from vents, heating or cooling elements, direct sunlight, windows, doors, or any other openings.
Page 4
FCC Notice This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Need help?
Do you have a question about the TP-60 and is the answer not in the manual?
Questions and answers
How do you open the battery cover on the sending unit. I’m afraid to pry it with a knife as I might crack the edge.
Remove the two small screws at the back of the remote sensor with a small screwdriver, then slide off the battery compartment door.
This answer is automatically generated