Toyota Camry Hybrid 2015 Manual page 220

220
4-5. Using the driving support systems
■
Turning off both TRAC and VSC systems
To turn the TRAC and VSC systems off, press and hold
seconds while the vehicle is stopped.
The VSC OFF indicator light will come on and the "TRAC OFF" and a mes-
sage will be shown on the multi-information display
Press again to turn the systems back on.
*
: On vehicles with pre-collision system, pre-collision brake assist and pre-
collision braking will also be disabled. The pre-collision system warning
light will come on and the message will be shown on the multi-information
display. (P. 227)
■
When the message is displayed on the multi-information display show-
ing that TRAC has been disabled even if
TRAC and hill-start assist control cannot be operated. Contact your Toyota
dealer.
■
Sounds and vibrations caused by the ABS, brake assist, TRAC and VSC
systems
Any of the following conditions may occur when the above systems are oper-
ating. None of these indicates that a malfunction has occurred.
●
Vibrations may be felt through the vehicle body and steering.
●
A motor sound may be heard after the vehicle comes to a stop.
●
The brake pedal may pulsate slightly after the ABS is activated.
●
The brake pedal may move down slightly after the ABS is activated.
■
ECB operating sound
ECB operating sound may be heard in the following cases, but it does not
indicate that a malfunction has occurred.
●
Operating sound heard from engine compartment when the brake pedal is
operated.
●
Motor sound of the brake system heard from the front part of the vehicle
when the driver's door is opened.
●
Operating sound heard from the engine compartment when one or two min-
utes passed after the stop of the hybrid system.
■
EPS operation sound
When the steering wheel is operated, a motor sound (whirring sound) may be
heard. This does not indicate a malfunction.
for more than 3
*
.
has not been pressed