Sony SRG-A40 Manual page 10

Technical Guide | SRG-A40/SRG-A12
3.5.2. When setting camera as the Listener
Open [Stream] > [Stream] tab of the Web App Menu and select [SRT-Listener] in [Stream Setting]
> [Setting].
Set the port number of the camera in [SRT] > [Port Number]. Press [OK] to complete the setting.
3.5.3. Setting of Latency and TTL
Set [Latency] and [TTL] upon the transmission environment.
It is recommended to set enough latency according to RTT from the camera to the destination
measured in advance.
For the recommended setting value, please refer to the information announced from SRT Alliance
below.
Sony
SRT introduction
9
Version 1.0