Table of Contents
Advertisement
uIO-Stick v2
User guide
Safety precautions
Safety precautions
Note:
Please note the following warnings regarding the hazards associated with development systems.
Table 1
Safety precautions
User guide
Caution: The heat sink and device surfaces of the evaluation or reference board
may become hot during testing. Hence, necessary precautions are required while
handling the board. Failure to comply may cause injury.
Caution: Only personnel familiar with the drive, power electronics and associated
machinery should plan, install, commission and subsequently service the system.
Failure to comply may result in personal injury and/or equipment damage.
Caution: The evaluation or reference board contains parts and assemblies
sensitive to electrostatic discharge (ESD). Electrostatic control precautions are
required when installing, testing, servicing or repairing the assembly. Component
damage may result if ESD control procedures are not followed. If you are
not familiar with electrostatic control procedures, refer to the applicable ESD
protection handbooks and guidelines.
Caution: A drive that is incorrectly applied or installed can lead to component
damage or reduction in product lifetime. Wiring or application errors such as
under-sizing the motor, supplying an incorrect or inadequate DC supply, or
excessive ambient temperatures may result in system malfunction.
Caution: The evaluation or reference board is shipped with packing materials
that need to be removed prior to installation. Failure to remove all packing
materials that are unnecessary for system installation may result in overheating or
abnormal operating conditions.
3
Rev. 1.00
2023-05-30
Advertisement
Table of Contents
