Acronyms - Infineon uIO-Stick v2 User Manual

uIO-Stick v2
User guide

5 Acronyms

5 Acronyms
The following acronyms and terms are used within this document.
Table 4 Acronyms
Acronyms Name
CAN Controller area network
CANH Controller area network high
CANL Controller area network low
CLK Clock
CS Chip select
GND Ground
GPIO General-purpose input/output
HID Human interface device
LIN Local interconnect network
MISO Master in, slave out
MOSI Master out, slave in
RXD Receive data
SPI Serial peripheral interface
SW Software
TXD Transmit data
USB Universal serial bus
UART Universal asynchronous receiver-transmitter
VS Supply voltage
User guide 10 Rev. 1.00
2023-05-30