Filling The Clean Water Tank - Bissell TURBOCLEAN POWERBRUSH PET 2987Series Quick Start Manual

Filling the Clean Water Tank

For additional tips and tricks on filling your clean water tank visit support.BISSELL.com.
1.
Remove the clean water
tank by lifting straight up and
away from the machine.
4.
Add cleaning formula or ANTIBACTERIAL Formula with EasyFill System.
Cleaning Formula
Add formula to the
"formula maximum" line.
5.
Replace and tighten the
cap.
2.
Unscrew the cap at the
bottom of the tank.
ANTIBACTERIAL Formula with EasyFill System
Twist the yellow cap back onto the tank. Firmly insert the formula
bottle into the cap on the tank and squeeze until formula reaches the
"easy fill antibacterial" line and skip to step 6.
Note: BISSELL ANTIBACTERIAL formula is only for BISSELL machines
with EasyFill System.
6.
Replace the tank on the
machine until it "clicks" into
place.
3.
Fill with hot (140°F/60°C
MAX) tap water to the WATER
line. Do not use boiling water.
Do not heat water in the
microwave.
BISSELL.com 5