Table of Contents
Advertisement
Section 3 - Configuration
Advanced Settings... - Address Autoconfiguration Settings
Enable Automatic
Enable or disable the Automatic IPv6 Address Assignment
IPv6 Address
feature.
Assignment
If Enable DHCP-PD is enabled in the previous LAN IPv6 Address Settings:
Enable Automatic
Enable or disable DHCP-PD for other IPv6 routers connected
DHCP-PD in LAN
to the LAN interface.
Autoconfiguration
Select SLAAC+RDNSS, SLAAC+Stateless DHCP, or Stateful
Type
DHCPv6.
If you selected SLAAC+RDNSS or SLAAC+Stateless DHCP as the Autoconfiguration Type:
Router
Enter the router advertisement lifetime (in minutes).
Advertisement
Lifetime
If you selected Stateful DHCPv6 as the Autoconfiguration Type:
IPv6 Address
Enter the starting IPv6 address for the DHCP server's IPv6
Range (Start)
assignment.
IPv6 Address
Enter the ending IPv6 address for the DHCP server's IPv6
Range (End)
assignment.
D-Link DIR-2640 User Manual
53
Advertisement
Table of Contents
