Table of Contents
Advertisement
Load case
Driver and passenger in the
front passenger seat.
Three passengers in the rear
seat.
220 kg load in the cargo area.
Driver and maximum load in
the cargo area.
Related information
Lighting control (p. 150)
•
Position lamps
Thumb-
Position lamps can be used so that other road
wheel
users can see the car if it stops or is parked.
position
The position lamp is switched on with the
1
rotating ring on the stalk switch.
2
Stalk switch rotating ring in position lamps position.
Turn the rotating ring to the
the position lamps are switched on (number
plate lighting is switched on at the same
time).
If the car's electrical system is in ignition posi-
tion II then the daytime running lights are
switched on instead of the front position
lamps. When the rotating ring is in this posi-
tion, the position lamps are switched on
regardless of the ignition position of the car's
electrical system.
If the car is stationary but running, the rotating
ring can be moved to the position lamp
position from another position to switch on
only the position lamps instead of other light-
ing.
When driving for more than 30 seconds at
max. 10 km/h (approx. 6 mph), or if the speed
exceeds 10 km/h (approx. 6 mph), the daytime
running lights are switched on. The driver
should turn to a position other than
If the tailgate is opened when it is dark out-
side, the rear position lamps come on (if not
already switched on) to warn road users
approaching from behind. This takes place
irrespective of the position of the rotating ring
or the ignition position of the car's electrical
system.
Related information
Lighting control (p. 150)
•
position -
Ignition positions (p. 432)
•
Replacing daytime running light bulb/posi-
•
tion lamp bulb, front (p. 646)
LIGHTING
.
153
Advertisement
Table of Contents
