Table of Contents
Advertisement
LOADING, STORAGE AND PASSENGER COMPARTMENT
||
3.
Position the safety grille's brackets on the
roof mountings.
The next step is facilitated if two people
hold the safety grille in the right position.
4
Installation instructions no. 31659257.
600
4.
Insert the supplied screw and tighten
using the supplied 6 mm Allen key. Repeat
on the other side. Recommended tighten-
ing torque: 20 Nm (15 foot-pounds).
> Check that the safety grille is properly
fitted.
5. Restore the backrest to the upright posi-
tion.
For more information about the tools required
and methods for fitting/removal, see the
installation instructions
4
that were included
with the initial purchase.
IMPORTANT
The protective grille cannot be folded up or
down when a cargo cover is fitted.
Related information
Recommendations for loading (p. 593)
•
Load retaining eyelets (p. 596)
•
Advertisement
Table of Contents
