Table of Contents
Advertisement
4.
Select a hole in the height-of-cut bracket
corresponding to the height-of-cut desired, and
insert the pin
(Figure
5.
Push on the deck lift, pull up on the transport
lock knob, and slowly lower the mower deck.
Figure 33
1. Deck-lift pedal
2. Height-of-cut holes
33).
3. Height-of-cut pin
4. Transport lock knob
Adjusting the Anti-Scalp
Rollers
Whenever you change the height of cut, adjust the
height of the anti-scalp rollers.
Note:
Adjust the anti-scalp rollers so that the rollers
do not touch the ground in normal, flat mowing areas.
1.
Park the machine on a level surface, disengage
the blade-control switch and engage the parking
brake.
2.
Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3.
Adjust the anti-scalp rollers as shown in
34.
g036745
1. Flange nut
2. Bolt
3. Bushing
32
Figure 34
4. Anti-scalp roller
5. Spacer
Figure
g036848
Advertisement
Table of Contents
