Advertisement
5.5.
POWER ON/OFF
5.5.1.
Connect to mains supply and turn the unit on using the red rocker switch.
5.5.2.
Heater is initially in standby mode and screen shows "P0".
5.6.
Press
to start heater using the upper lamp. Screen shows "P1"
5.7.
Press
P0
OFF
P1
Top element only
P2
24
C
0
P3
26
C
0
5.8.
While the lamp is working, the user can switch modes from "P1" to "P6" using the
effect when in "P6" mode.
5.9.
To power off the unit, use the
5.10.
SETTING SHUTDOWN TIMER
5.10.1.
Press
to set the shut down time. Screen initially shows 00:00.
5.10.2.
Press
or
5.10.3.
When the required time is set, press
5.10.4.
When the time is up, the heater turns off aromatically and enters the standby state P0.
5.11.
OPEN WINDOW DETECTION FUNCTION
5.11.1.
When ambient temperature drops over 5°C in 10 minutes, heater will power off automatically and sound 3 alarm beeps. Power on
again by pressing
.
© Jack Sealey Limited
to select mode "P0" to "P6"
P4
28
C
0
P5
30
C
0
P6
Both elements
button. The unit will revert back to showing the standby "P0" screen.
to set shut down time. Time increases or decreases by 1 hour per press.
. The screen will show the number of hours set i.e. "02:00" as well as current mode.
Original Language Version
button. The unit displays the full cascade
IR14.V2 Issue:1 10/05/23
Advertisement
