Advertisement
5.3.
To switch the unit off, select "0" on the rocker switch and unplug from the mains. Allow the unit to cool before handling or storage.
WARNING! DO NOT touch the top of the heater when in use as it becomes hot.
WARNING! Always allow elements to cool before moving the units. Use only on a smooth even surface. Failure to do so will cause premature
wear to the lamps and reduce their working life.
5.4.
The heater has a built in tilt switch safety mechanism that switches off the unit if it is tilted beyond 35° either forwards or backwards.
This prevents fire in the event of the unit being knocked over. The heater requires manual input to restart e.g. it does not restart
automatically.
WARNING! DO NOT use this heater in small rooms when they are occupied by persons not capable of leaving the room on their own,
unless constant supervision is provided.
5.5.
Place the heater on a level floor in the area you require to heat.
5.6.
Allow a minimum of 2m between the heater and adjacent objects.
5.7.
POWER ON/OFF
5.7.1.
Connect to mains supply turn on red rocker switch.
5.7.2.
Heater is in standby screen shows 'OF'.
5.7.3.
Press
to start heater. Screen shows: week, time, ambient
5.7.4.
temperature and power indication.
5.7.5.
Press
again heater turns off , returns to standby screen shows 'OF'.
5.8.
SETTING TEMPERATURE
5.8.1.
Default temperature at power on is 30°C.
5.8.2.
Press
or
5.8.3.
After 5 seconds screen defaults to ambient temperature.
5.8.4.
Next setting will be based on the previous set temperature.
5.8.5.
Heater will only work when ambient is lower than the set temperature.
5.9.
SETTING POWER
5.9.1.
Heater has 3 power settings selected by pressing.
5.9.2.
POWER SETTING 1 TOP ELEMENT ON
Screen displays:
5.9.3.
POWER SETTING 2 BOTTOM ELEMENT ON
Screen displays:
5.9.4.
POWER SETTING 3 BOTH ELEMENTS ON
Screen displays:
5.10.
SETTING CURRENT DATE AND TIME
5.10.1.
After power on press
5.10.1.
When DAY symbol (Mon to Sun) fl ashes, press
5.10.2.
Press
again to select HOUR by pressing
5.10.3.
Press
again to select MINUTES by pressing
© Jack Sealey Limited
to set temperature. One press = 1°C. Screen shows temperature only. Range is 15 to 45°C.
for 3 seconds to set current date and time.
Original Language Version
to select day.
IR15110V
Issue:2(5.15)
24/08/21
Advertisement
