Table of Contents
Advertisement
3 Service Navigation
3.1.
Introduction
This service manual contains technical information, which allow service personnel's to understand and service this model.
Please place orders using the parts list and not the drawing reference numbers.
If the circuit is changed or modified, the information will be followed by service manual to be controlled with original service manual.
3.2.
Important Notice
3.2.1.
About Main P.C.B. (Addition of the operation of rewriting Serial number)
As this unit's specification, the Serial number of camera body is stored to EXIF date of picture image. So that, the Serial number of
camera body is memoried in the Flash-ROM (IP2951) of Main P.C.B..
Therefore when replacing the Main P.C.B. and/or Flash-ROM (IP2951), it is necessary rewriting to its original Serial number.
For the details of rewriting procedures, please confirm the contents of "Write S/N" in "10.3.2. Adjustment Specifications" and carry
out the procedures.
3.2.2.
About Lens Block
The CMOS Unit is adjusted to the Lens Unit (w/o mos) with 3 screws, after performing the optical tilt adjustment.
During servicing, if one of CMOS Unit fixing screws are loosened, the optical tilt adjustment must be performed.
(About the optical tilt adjustment, refer to the "10.3.2. Adjustment Specifications" for details.)
7
Advertisement
Table of Contents
