Table of Contents
Advertisement
Network Fisheye Camera·Quick Start Guide
6. To adjust the view angle: Rotate the camera body clockwise or
anticlockwise with the base plate, and then you can adjust the
camera to the desired view angle.
7.
To install the water-proof jacket for network interface (optional):
It is recommended to adopt the water-proof jacket (supplied) for
the network interface when the camera is installed outdoor.
1). If the network cable has been settled down, cut off the plug of
the network cable first.
2). Route the network cable through the following components in
sequence: fix nut, water-proof ring, and the main body of the
water-proof jacket, as shown in the figure.
3). Insert the water-proof ring into the main body of the
water-proof jacket, to increase the sealing ability of the
components.
Figure 2-5
Adjust View Angle
17
Advertisement
Table of Contents
