Control Panel - LG LRBCC1204 Series Owner's Manual

18 OPERATION

Control Panel

Depending on the model, some of the following functions may not be available.
The actual control panel may differ from model to model.
Control Panel Features
Freezer
a
Indicates the set temperature of the freezer compartment in Fahrenheit (°F). The default freezer
temperature is 0°F. Press the Freezer button repeatedly to select a new set temperature from -7 °F to 5
°F.
Ice Plus
b
This function increases both ice making and freezing capabilities.
Press and hold the Ice Plus button to illuminate the icon and activate the function for 24 hours. The
function automatically shuts off after 24 hours. Stop the function manually by pressing the button once
more.
Refrigerator
c
Indicates the set temperature of the refrigerator compartment in Fahrenheit (°F). The default
refrigerator temperature is 37 °F. Press the Refrigerator button repeatedly to select a new set
temperature from 33 °F to 43 °F.
NOTE
• The displayed temperature is the target temperature, and not the actual temperature of the refrigerator.
The actual refrigerator temperature depends on the food inside the refrigerator.
Express Cool
d
Use this function to quickly cool a large amount of fresh food.
• To activate, press and hold the Express Cool button until the LED lights up on the control panel.
• The function operates for about 7 hours, then turns off automatically.
• Stop the function manually by pressing and holding the button again.
Vacation
e
Set the refrigerator to Vacation mode to reduce energy consumption when you are away from home
for a few days.
• Press the Vacation button to turn the function off or on. The LED stays lit when the function is on.
• When this function is on, the other buttons on the control panel are locked. When you return home,
remember to turn this function off to unlock the other buttons and return the refrigerator to its
previous temperature settings.
NOTE
• When the refrigerator is in the Power Saving Mode, the display remains off until a door is opened or a
button is pressed. Once on, the display remains on for 20 seconds.