Reversing Doors And Leveling - LG LRBCC1204 Series Owner's Manual

12 INSTALLATION
Dimensions and Clearances
• Check the dimensions of the appliance and the installation path to ensure there is sufficient room to
move the refrigerator through doors or narrow openings.
• The installation location chosen for the refrigerator should allow space behind the unit for connections
and airflow and space in front to open the doors and drawers.
• Too small of a distance from adjacent items may result in lowered freezing capability and increased
electricity consumption charges. Allow at least 29 1/8 inches (740 mm) in front of the refrigerator to open
the doors, and at least 2 inches (50.8 mm) between the back of the refrigerator and the wall.
-
A Depth
B Width
C Height to Top of Case
D Height to Top of Hinge
E Back Clearance
F Depth without Door
G Depth (Total with Door Open 90°)
H Front Clearance
Reversing Doors and
Leveling
Reversing Doors
This feature is only available on some models.
Your appliance is designed with reversible doors
which can be assembled to open from either the
left or right side to suit your kitchen design.
Door reversal must be done by an authorized
installer or service person. If it is not, any damage
caused by improperly installed doors will not be
covered by the warranty.
B
A
C
D
Dimension/Clearance
E
F
G
Leveling
The refrigerator has two front leveling legs. Adjust
the legs to alter the tilt from front-to-back or side-
to side. If the refrigerator seems unsteady or the
doors do not close easily, adjust the refrigerator's
tilt, using the instructions below:
1
Turn the leveling leg to the left to raise that
side of the refrigerator or to the right to lower
it. It may take several turns of the leveling leg
to adjust the tilt of the refrigerator.
H
LRBCC1204*
26 5/8" (677 mm)
23 1/2" (595 mm)
73 1/4" (1860 mm)
73 1/4" (1862 mm)
2" (50 mm)
24" (610 mm)
48 3/16" (1225 mm)
29 1/8" (740 mm)