Reversing Doors And Leveling - LG LT18S2100 Series Owner's Manual

en-us_main.book.book Page 15 Monday, December 18, 2023 1:46 PM
2
Lift up the refrigerator door slightly and
remove it. Set the door aside on a non-
scratching surface.
Assembling the Refrigerator Door
1
Set the refrigerator door on the bottom hinge
pin .
a
2
Place the middle hinge pin
pin sleeve on the top of the refrigerator
c
door.
3
Hold the door in place and line up the hinge
with the holes in the refrigerator housing.
4
Use the two bolts and the screw to reattach
the middle hinge bracket to the refrigerator
housing.
Reversing Doors and
Leveling
Reversing Doors
This feature is only available on some models.
The method for reversing the door may differ
depending on the model.
The appliance is designed with reversible doors
that can be assembled to open from either the left
or right side to suit your kitchen design.
Door reversal must be done by an authorized
installer or service person. If it is not, any damage
caused by improperly installed doors will not be
covered by the warranty.
• Use two or more people to remove and install
the refrigerator doors.
• Disconnect the electrical supply to the
refrigerator before installing.
inside the hinge
b
• Be careful when handling the hinge and hinge
lever.
• Remove food and bins before detaching the
doors.
• Do not hold the handle when removing or
replacing the doors as the handle may come off.
• When reassembling the bottom and middle
hinge pins, make sure the pins are completely
assembled and securely tightened to avoid the
door coming loose.
• Tools Needed
- Flat-head screwdriver
- 1/4 in. Hex socket wrench
- 3/8 in. Hex socket wrench
- 1.4 in. Hex key wrench
- Adjustable wrench
INSTALLATION
WARNING
CAUTION
15