Table of Contents
Advertisement
Emptying the Dirty Water Tank
WARNING
To reduce the risk of electric shock, turn power OFF and disconnect from electrical outlet
before performing maintenance or troubleshooting.
1
To remove the Dirty Water Tank simply
pull the top of the tank to the right.
3
Carefully empty Dirty Water Tank, as
some water may potentially enter/drain
from center float stack.
5
To disconnect the cleaning tools from
the hose grip, push down on the button
and pull straight off. (Do NOT twist tool
to remove it.)
NOTE: Store machine in protected, dry area at room temperature (40 degrees
F to 110 degrees F).
NOTICE
To reduce the risk of a leaking condition, do not store machine where freezing may occur.
Damage to internal components may result.
2
Pull tab to remove plug from tank.
4
Close the tank plug and return tank
to machine. Ensure tank is secure
before use.
6
The front of the 3" Tough Stain Tool, Deep
Stain Tool, 3-n-1 and Stain Trapper Tool
(select models) can be removed for easy
cleaning. Press the button on top of the
tool and slide its front off the tool base.
Rinse under water and return to tool.
www.BISSELL.ca
11
Advertisement
Table of Contents
