Table of Contents
Advertisement
periods.
The appliance must be positioned so that the plug is accessible. If the supply cord is damaged
it must be replaced by the manufacturer or service agent or a similarly qualified person in order
to avoid a hazard. Keep the supply cord away from the front of the appliance.
Warning:
Do not use this heater in small rooms when they are occupied by persons not
capable of leaving the room on their own, unless constant supervision is provided.
Warning:
To reduce the risk of fire, keep textiles, curtains, or any other flammable material a minimum
distance of 1m from the air outlet.
Caution:
Some parts of this product can become very hot and cause burns. Particular attention has
to be given where children and vulnerable people are present. This instruction can be found at www.
dimplex.co.uk
Warning:
In order to avoid overheating, do not cover the heater. Do not place material or garments
on the appliance, or obstruct the air circulation around the appliance, for instance by curtains or
furniture, as this could cause overheating and a fire risk.
The appliance carries the Warning Symbol shown here on the right.
This symbol indicates that it must not be covered. Do not cover or obstruct the heat outlet grill
in any way. This is located above the flame window on the appliance.
Warning:
In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this appliance
must not be supplied through an external switching device, such as a timer, or connected to a circuit
that is regularly switched on and off by the utility.
Dimplex Optiflame Inset Fire
Models: CHT20X, KNG20X, CST20X, DTT20X, ZAM20X
Thank you for choosing a Dimplex electric fire.
General Information
The fire incorporates a flame effect, which can be used with or without heating, so that the comforting
effect may be enjoyed at any time of the year.
A fan heater can provide heating in cold weather. A distance of 1 metre (3 feet) must be maintained
between the front of the heater and any surrounding furniture, overhanging curtains or other
obstructions.
Always ensure that the appliance is sitting on a level surface.
Before connecting the appliance, check that the supply voltage is the same as that stated on the
appliance.
Please note: Used in an environment where background noise is very low, it may be possible to hear a
sound which is related to the operation of the flame effect. This is normal and should not be a cause for
concern.
3
Advertisement
Table of Contents
