Application Service; Air Conditioner - Geely GEOMETRY C Manual

Multimedia system

Application service

Air Conditioner

Introduction to Air Conditioning
1
2
13
7
1. [AUTO]： When you click the AUTO button, it means the function is on. When this
function is on, the air conditioner will automatically adjust the air volume and cooling and
heating according to the currently set temperature value. (This feature is only available in
some models)
2. [A/C MAX]： This function is turned on when the A/C MAX button is clicked. When this
function is on, the setting temperature is automatically adjusted to the lowest and the air
volume is adjusted to the maximum.
3.
[A/C]: When you click the A/C button, it means the function is on. When this function is
on, the air conditioner compressor starts to work and the air conditioner cools.
4.
[ ]：Click this button to turn on/off the front defrost mode.
5.
[ ]：Click this button to turn on/off the rear defrost mode.
6.
[ ]：Switch the air circulation mode of the vehicle, the user can switch between interior
circulation/external circulation.
7.
[Temperature Regulation]: The temperature is indicated as the temperature inside the
car. Press "+"/ "-" to adjust the temperature up/down by 0.5°C.
8.
[Airflow]：Displays the current setting airflow (airflow range:1~8).
9.
[Wind direction]： Displays the current blowing wind direction. There are blowing face
mode, blowing foot mode, blowing face/foot mode, blowing foot/defrost mode, and
defrost mode.
10.
[AQS]: Click this button to disable/enable the AQS function.
11.
[Negative Ion]: Click this button to disable/enable the negative ion function.
3 4 5
9
15
18
10
6
11
14
8
12
7