Advertisement
cylinder head could cause a positive leak test.
•
This tool identifies the presence of CO2, not the cause. It is the end users responsibility to determine the cause of
the presence of CO2 in the coolant system.
Step #5 CLEAN THE TOOL
• Pour the test fluid into a suitable container.
• NOTE: Do not pour the test fluid into the original container. Contamination will occur.
• NOTE: Check with your local government or recycling center on how to dispose of the test fluid. (Bromothymol Blue)
• Disassemble the tool and flush with clean water only. Allow the parts to air dry.
• NOTE: Do not use compressed air, paper or cloth towels. Contamination may occur.
• When the parts have dried. Reassemble the tool and put it back in the plastic box that it was purchased with.
WARNING: This product can expose you to chemicals including Di (2-ethylhexyl) phthalate, lead and lead compounds, which are known
to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov
4
43707-INST
Advertisement
