1060 M.2 2280 Solid-State Drive - Lenovo P16 Gen 1 Hardware Maintenance Manual

indicators on ESC, F1, and F4 blinking sequentially to indicate the progress. Do not press the power
button to interrupt the process. Wait a few minutes until the logo screen is displayed.

1060 M.2 2280 solid-state drive

Attention: The M.2 solid-state drive is sensitive. Inappropriate handling might cause damage and
permanent loss of data.
When handling the M.2 solid-state drive, observe the following guidelines:
• Replace the M.2 solid-state drive only for upgrade or repair. The M.2 solid-state drive is not designed for
frequent changes or replacement.
• Before replacing the M.2 solid-state drive, make a backup copy of all the data that you want to keep.
• Do not apply pressure to the M.2 solid-state drive.
• Do not touch the contact edge or circuit board of the M.2 solid-state drive. Otherwise the M.2 solid-state
drive might get damaged.
• Do not make the M.2 solid-state drive subject to physical shocks or vibration. Put the M.2 solid-state drive
on a soft material, such as cloth, to absorb physical shocks.
Your computer comes with two M.2-solid-state-drive slots in total. Slot
b is under the keyboard. When you configure the M.2-solid-state-drive slot in the UEFI BIOS menu, ensure
that you select the correct menu item.
• Slot : NVMe1
a
• Slot : NVMe2
b
M.2 2280 solid-state drive with the bracket under the bottom door
For access, remove this FRU:
• "1010 Bottom cover" on page 65
a is under the bottom door, and slot
.
Chapter 9 Removing or replacing a FRU
71