1070 Base Cover Assembly; M2 × 3 Mm, Flat-Head, Nylon-Coated (1) Black - Lenovo P16 Gen 1 Hardware Maintenance Manual

Step Screw (quantity)
1
M2 × 3 mm, flat-head, nylon-coated (1)
For computer models with the factory color calibration feature, if the operating system is reinstalled after the
storage drive replacement, do the following to reinstall the color profiles:
1. Connect your computer to the network and open the preinstalled X-Rite Color Assistant app.
Note: If the app is uninstalled, reinstall it by downloading the installation package from
pcsupport.lenovo.com/us/en/downloads/DS543953
2. Go to Settings ➙ Restore profiles. The app will download and install its unique color profiles from
Lenovo cloud automatically.

1070 Base cover assembly

For access, remove this FRU:
• "1010 Bottom cover" on page 65
Removal steps of the base cover assembly
Applying labels to the base cover assembly
Notes:
• Depending on the country or region of delivery, the labels might be slightly different from the ones in the
following illustration.
• The new base cover assembly FRU is shipped with a kit containing labels of several kinds. Apply those
labels when you replace the base cover assembly. For the labels that are not shipped with the new base
cover assembly, peel them from the old base cover assembly, and adhere them to the new one.
Color Torque
Black 0.181 Nm
(1.85 kgf-cm)
https://
.
Chapter 9 Removing or replacing a FRU
73