Digital Watchdog Star-Light Plus DWC-B6853WTIR Quick Start Manual

DWC-B6853WTIR
WHAT'S IN THE BOX
Mounting
Star wrench 1
template
Torx Wrench DC Plug Cable Test Video Cable
Torx Wrench DC Plug Cable
Moisture
Test video absorber and
1
cable absorber guide
Torx Wrench
(recommended)
Sunshield cover &
ench DC Plug Cable Test Video Cable
Screw &
Template Sheet Manual
Sunshield
Template Sheet Manual
cover and Quick setup
Sunshield cover &
1
rench DC Plug Cable Test Video Cable
adjusting guide
screws
Sunshield cover &
ble Test Video Cable
Template Sheet
Screws
Screw & Moisture absorber &
Sheet Manual
and plastic
Absorber Guide
1 Set DC plug cable
anchors
(4pcs)
Screw & Moisture absorber &
Sheet Manual
Absorber Guide
Screw & Moisture absorber &
Absorber Guide
NOTE: Download all your support materials and tools in one place.
1. Go to: http://www.digital-watchdog.com/resources
2. Search your product by entering the part number in
the 'Search by Product' search bar. Results for
applicable part numbers will populate automatically
based on the part number you enter.
3. Click 'Search'. All supported materials, including manuals
and quick start guide (QSGs) will appear in the results.
Attention: This document is intended to serve as a quick reference for the
initial setup. It is recommended that the user read the entire instruction
manual for complete and proper installation and usage.
Tel: +1 (866) 446-3595 / (813) 888-9555
Technical Support Hours:
9:00 AM – 8:00 PM EST, Monday through Friday
Quick Start Guide
STEP 1 – PREPARING TO MOUNT THE CAMERA
1. The mounting surface must withstand five times the camera weight.
2. Do not let the cables get caught in improper places or the electric line cover can be damaged. This may cause a short or fire.
3. Install the moisture packet in the base of the camera's lens.
a. Remove the moisture absorber from the packaging.
b. Cut the card and folder along the dotted line.
c. Place the moisture absorber behind the camera's lens module. See drawing for more information.
Torx Wrench DC Plug Cable Test Video Cable
1
WARNING:
Sunshield cover &
Sunshield cover &
Test Video Cable
Screw &
Template Sheet Manual
1
Sunshield cover &
DC Plug Cable Test Video Cable
Moisture absorber &
Screw & Moisture absorber &
Absorber Guide
Absorber Guide
1
Screw & Moisture absorber &
Manual
Absorber Guide
1
4. Using the mounting template sheet or the camera itself, mark and drill
the necessary holes in the wall or ceiling.
STEP 2 – CABLING THE CAMERA TO EXTERNAL DEVICES
Pass the wires through the mount bracket and make all necessary connections. Connect the BNC cable and power cables to the camera.
digital-watchdog.com
NOTE: The camera will generate enough heat to dry moisture
during operation. In most cases it will not need the
moisture absorber for more than the first day. In cases
where the camera can experience a moisture issue,
users must keep the moisture absorber in the camera.
Sunshield cover &
The moisture absorber has an approximately 6-month
life cycle, varying depending on the environment.
It is highly recommended that you install the moisture
absorber when mounting the camera. The moisture
Moisture absorber &
absorber prevents moisture from being captured
Absorber Guide
inside the camera's housing, which may cause image
performance issues and damage the camera.
Please cut the card type absorber along
Please cut the card type absorber along
a dotted line, overlap and attach them
a dotted line, overlap and attach them
according to the direction of the arrow.
according to the direction of the arrow.
Power requirements
DC12V
Quick Start Guide
Power consumption
DC12V (LED off): 3W (250mA)
DC12V (LED on): 4.2W (352mA)