Yamaha KODIAK 700 Owner's Manual page 112

1. O-ring
TIP
Make sure that the O-ring is properly seated.
8
9. Install the new oil filter cartridge with an oil fil-
ter wrench, and then tighten it to the specified
torque with a torque wrench.
1. Torque wrench
Tightening torque:
Oil filter cartridge:
15 N·m (1.5 kgf·m, 11 lb·ft)
10. Install panel F.
11. Install the engine oil drain bolt and its new
gasket, and then tighten the bolt to the spec-
ified torque.
Tightening torque:
Engine oil drain bolt:
22 N·m (2.2 kgf·m, 16 lb·ft)
8-23
1