Advertisement
5. MAINTENANCE
WARNING! Disconnect buffer from air supply before changing accessories, servicing or
performing maintenance . Replace or repair damaged parts . Use genuine parts only. Un
authorised parts may be dangerous and will invalidate the warranty.
5 .1 .
Lubricate the buffer daily with a few drops of Sealey air tool oil dripped into the air inlet to
prolong its life .
5 .2 .
Clean the buffing kit after use . DO NOT use damaged stone wheels .
5 .3 .
Loss of power or erratic action may be due to the following:
a) Excessive drain on the air line . Moisture or restriction in the air pipe . Incorrect size or
type of hose connectors . To remedy check the air supply and follow instructions in
chapter 3 .
b) Grit or gum deposits in the buffing kit may also reduce performance . If your model has
an air strainer (located in the area of the air inlet), remove the strainer and clean it . Flush
the buffer out with gum solvent oil or an equal mixture of SAE No 10 oil and paraffin .
Allow to dry before use .
5 .4 .
For a full service contact your local Sealey service agent .
5 .5 .
When not in use, disconnect from air supply, clean buffer and store in a safe, dry,
childproof location .
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product .
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim .
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode .
© Jack Sealey Limited
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park,
Bury St . Edmunds, Suffolk,
IP32 7AR
Original Language Version
01284 757500
01284 703534
email
SA92 .V2
www .sealey .co .uk
sales@sealey .co .uk
Issue:3(SP)- 20/12/13
Advertisement
