Work Area Safety; Electrical Safety - Bosch GRL 245 HV Operating/Safety Instructions Manual

ALWAYS make sure that any bystanders in the vicinity of use are made aware of the dangers
of looking directly into the laser tool.
DO NOT place the laser tool in a position that may cause anyone to stare into the laser beam
intentionally or unintentionally. Serious eye injury could result.
ALWAYS position the laser tool securely. Damage to the laser tool and/or serious injury to the user
could result if the laser tool falls.
ALWAYS use only the accessories that are recommended by the manufacturer of your laser
tool. Use of accessories that have been designed for use with other laser tools could result in serious
injury or unsatisfactory performance.
DO NOT use this laser tool for any purpose other than those outlined in this manual. This
could result in serious injury or unsatisfactory performance.
DO NOT leave the laser tool "ON" unattended in any normal operating mode.
DO NOT disassemble the laser tool. There are no user serviceable parts inside. Do not
modify the product in any way. Modifying the laser tool may result in hazardous laser radiation
exposure.
FCC Statement
This product has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician for help.
Declaration of Conformity
We declare under our sole responsibility that the product described under "Technical Data" is in
conformity with the following standards or standardization documents: EN 61010-1, EN 60825-1
(measurement tool) according to the provisions of the directives 2006/95/EC, 2004/108/EC, 2006/42/EC.

WORK AREA SAFETY

Keep work area clean and well lit. Cluttered
or dark areas invite accidents.
DO NOT operate the laser tool around
children or allow children to operate the
laser tool. Serious eye injury could result.
DO NOT use measuring tools, attachments
and accessories outdoors when lightening
conditions are present.
DO NOT operate the measuring tool in explosive
atmospheres, such as in the presence of
flammable liquids, gases, or dust.
SAVE THESE INSTRUCTIONS
SAVE THESE INSTRUCTIONS

ELECTRICAL SAFETY

Batteries can explode or leak, cause injury
or fire. To reduce this risk, always follow all
instructions and warnings on the battery
label and package.
Do not short any battery terminals.
Do not charge alkaline batteries.
Do not mix old and new batteries.
Replace all old batteries at the same time with
new batteries of the same brand and type.
Do not mix battery chemistries.
Dispose of or recycle batteries per local code.
Do not dispose of batteries in fire.
-7-