Introduction - Crown EPXN-3 Installation & Operation Manual

Electric Counter Pan Steamers I
Ntroduction
I
NTRODUCTION
Description
The model EPXN-3 steamer comes equipped with a standard 9 kW heating block that can be reduced to 6 kW on
single phase supplies. Model EPXN-5 steamer comes equipped with a standard 15 kW heating block that can be
reduced to 10 kW on single phase supplies.
Your new steamer has been designed and manufactured to meet the toughest industry standards. The best possible
workmanship and materials along with laboratory tests have been utilized in its design.
Proper installation, care and maintenance will give you years of reliable, trouble free operation.
The EPXN-3 and EPXN-5 are electric fired pressureless steam cookers. The cooking compartments are equipped
with a three-piece door with inner gasket plate isolated from the exterior surface. Door latch operates by slam action
for positive sealing of the door. Operating controls are displayed on a front-mounted panel and include indicator lights
for ready and cooking modes, a timer to set cook times and an illuminated rocker mode selection switch for TIMED
COOKING, OFF and CONSTANT STEAM.
Basic Functioning
The cooker is ready for operation when the READY light comes on.
At the end of the set interval, timer contacts switch to shut off the cooking operation and sounds a signal buzzer and will
maintain a safe food holding temperature at or above 150°F. The buzzer is silenced by returning the timer dial to the OFF
position. The READY light will be illuminated.
INSTALLATION & OPERATION MANUAL 10234 REV 0 (03/21) 5
PAGE OF 20