Advertisement
You can choose between on and off with the rotary
control knob.
There can be chosen between various tone and sur-
round modes with the rotary control.
The select knob can be used to set an additional de-
lay of the sound output, so that you can achieve a
synchronous playback of sound and picture (step
size 10 ms, max. 400 ms).
Under this menu point there can be set the loudspeak-
er configuration. Furthermore, there will be defined
the operation mode. If there is set none or pre-output
at all channels, so the preAV works in standard mode
(default condition, stand-by power under 1 W). If there
is connected a speaker wireless, the preAV works in
Wireless mode (stand-by power under 2 W).
With the select rotary control the channel to be con-
figured can be selected.
Afterwards, there will be skipped to the right display
side by pressing the knob.
none
channel is not in use
pre output channel will be given out at the ana-
logue cinch output
new pairing Starts a pairing process to connect any
wireless speaker or receiver
If a speaker or receiver is assigned to this channel,
its name and ID code will appear here. If you will made
an alternative assignment, there can be chosen an-
other speaker. Every speaker is registered here. Con-
firm your selection by pressing the knob.
9
Advertisement
