Advertisement
Display menu / OSD menu and status information
If there is connected a TV or projector to the HDMI eARC output of the preAV, some
status information or an OSD menu will be shown on the connected device.
Status information
During operation, the volume, selected source, played signal
and selected sound processing mode are displayed. In the
case of audio-only sources, the display is permanent; in the
case of sources with picture and sound the display is hidden
again 5 seconds after an operating procedure.
On Screen Display
The OSD menu will be shown when you press the menu / hdmi
button on the remote control for at least 4 seconds. Use the
arrow keys and the central selection key to navigate.
The main menu contains the following menu points:
▪ Audio Source
▪ Sound processing
▪ Channel Configuration
▪ Output Adjustment
▪ Advanced System Setup
▪ Crossover Setup
▪ Distance Setup
In the sub menu audio source, there can be set the following
adjustments:
Analog Gain
Allows to select the sensitivity of the analogue AUX input
between 0 dB and +6 dB.
Lip Sync
An additional delay of the sound output can be set here to
achieve synchronous playback of sound and synchronous
playback of sound and picture. (Step size 10 ms, maximum
400 ms)
Bluetooth Setup
Allows the configuration of the Bluetooth input. Selecting
the pair entry starts the pairing process and pairing with a
corresponding smartphone, tablet or computer can be per-
formed for one minute. Selecting reset will clear the
memory of the paired devices.
11
Advertisement
