Advertisement
Quick Links
nuXinema AV Receiver
INITIAL OPERATION
INSTRUCTIONS FOR USE
Many thanks for your confidence in our product. To obtain fast information briefly, please read the
quick start guide first.
The following instruction guide elucidates all functions, operating and connections explicitly, so
that you could enjoy your new Nubert product in its entirety. You will be able to set up your system
without any problems if you read these operating instructions carefully.
We will explain the operation, connection and installation so that you can achieve the optimum
sound quality and fully enjoy your new nuXinema AV-Receiver!
Nubert electronic GmbH hereby declares that this product complies with the currently EU directives,
provided that it is installed and used in accordance with the manufacturer's instructions. The full
text of the EU Declaration of Conformity is available at the following Internet address:
https://www.nubert.de/konformitaetserklaerungen/716/
• Do not change the serial number on the speaker. It is part of the operating approval.
• If the loudspeaker is repaired or modified by workshops or other third parties not authorized by
Nubert, it loses its operating license.
• Only accessories and devices may be connected which in turn comply with all legal requirements
and are approved.
• This device may only be used for the applications specified in the „Intended Use" section.
Coldness, Sound and Dependability
.
When loudspeakers and other electric devices are brought from a cold into a warm
environment, it is possible that there will arise water condensation inside. In conse-
quence of that, there exists danger of any defects or an electric shock. Furthermore,
deep temperatures will have an impact on the flexibility of movable parts inside of the
loudspeaker.
1
Advertisement
Summary of Contents for Nubert nuXinema
- Page 1 The following instruction guide elucidates all functions, operating and connections explicitly, so that you could enjoy your new Nubert product in its entirety. You will be able to set up your system without any problems if you read these operating instructions carefully.
- Page 2 Connections and Application Examples The nuXinema must be wired completely before switching on – please look at the separately installation guide for more details. With the included remote control or our Nubert X-Remote Smartphone App you can choose between the sources you want to listen to (see the following section).
- Page 3 (for e.g., a remote receiver or smartphone). Simultaneously, it works as an additional audio input. Some devices which are de- signed exactly for those function – like the remote receiver Nubert nuConnect trXS – can broadcast audio signals by means of this port.
-
Page 4: Remote Control
With the on/off button, the nuXinema preAV can be turned on and off. Furthermore, it can be turned into the stand-by mode. ⚠ Notice: ▪ If the nuXinema preAV will be turned into the stand-by mode by using the remote control, the automatically switch-on function will be deactivated. - Page 5 If you press the menu/hdmi button for 4 seconds, there will be shown the display menu (OSD) of the nuXinema on the TV or video projector which is installed at the HDMI eARC port. In this OSD menu you can navigate by these arrow keys and the central selection key.
-
Page 6: Device Display
Additionally, there are some more functions available as follows: Setting password If necessary, you may request to set a password when the app will be loaded firstly. By the factory setting, the password is set at the value 0000. - Page 7 Currently chosen input Currently volume level Displaying of signal type and sound mode As a temporarily display (if necessary, as a ticker) there will be shown the currently sound or surround mode (here: Voice+) and the input signal (here: PCM2.0) at the start of the sound reproduction.
- Page 8 Main menu and submenu After turning on the nuXinema preAV there will be shown the preAV logo on the display screen. After 8 seconds it changes to the volume level menu auto- matically.
- Page 9 You can choose between on and off with the rotary control knob. There can be chosen between various tone and sur- round modes with the rotary control. The select knob can be used to set an additional de- lay of the sound output, so that you can achieve a synchronous playback of sound and picture (step size 10 ms, max.
- Page 10 ___ �� ___ gain 0 dB Input sensitivity for analogue AUX input can be set in 2 steps between 0 dB and +6 dB. ___ �� ___ preset 1 Press rotarx control to call presets 1, 2 or 3 | Save as ––––...
- Page 11 Display menu / OSD menu and status information If there is connected a TV or projector to the HDMI eARC output of the preAV, some status information or an OSD menu will be shown on the connected device. Status information During operation, the volume, selected source, played signal and selected sound processing mode are displayed.
- Page 12 In the sub menu Sound Processing there can be set the fol- lowing sound adjustments: ▪ Mid-Hi allows rising or lowering the mid/high range of the front speakers by up to 10 dB. See also page 13, section tone balance. ▪...
- Page 13 In the Advanced System Setup sub menu, the following settings can be made: Display Content allows the selection of the permanent operation display. The volume setting enables the permanent display of the volume menu; alternatively, the preAV logo can be displayed. Under Display Light the illumination level of the display is defined: normal: permanently full brightness auto dim: dims brightness automatically after 10 seconds...
- Page 14 • DTS • DTS X If the nuXinema preAV is connected by HDMI eARC, the compatibility will be often identified automatically so that the TV outputs the appropriate signal (the CEC function in the TV must be activated). In some cases, it may be possible to adjust players such as TVs or game consoles to the right settings manually.
- Page 15 SPDIF inputs deactivate the data stream accordingly. Automatic switch on The nuXinema preAV also has an auto power on feature that can automatically wake it up from stand-by mode. This function is only active if the loudspeaker has been set to stand-by mode by the automatic switch-off.
- Page 16 Sound and Surround modes The nuXinema preAV features several different sound and surround modes. These can be selected via the mode button on the remote control. The incoming sound signal is processed by the internal signal processor – partly according to Dolby or DTS specifi- cations, partly according to Nubert's own algorithms.